Arduino Mega2560 Pro Mini

Mini Arduino Mega2560 Pro

The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560.

The board has a compact 38x55mm form factor and is an excellent solution for developing projects based on ATmega2560.

Mega Pro Embed functions are the same as Arduino Mega 2560. Although it is an Embed card, it is robust like a Mega Board. It uses the original chip and has 16 MHz high quality quartz resonators on the board.

The board has a Micro USB connector that allows you to connect the micro-controller to the computer via the USB-UART adapter CH340 (A driver installation may be required). Download drivers: Windows, Linux, Mac, Android.

The board can be operated directly from the Micro USB connector or the corresponding contact (Vin) on the board. The voltage regulator used operates in the range of 6 to 9V DC.

The maximum output current above 5V is 800mA, at 3.3V it is about 800mA.

The voltage regulator allows up to 18V as the input value, but we do not recommend exceeding the recommended values mentioned above as this may cause excessive heat and damage the device.

Mini Arduino Mega2560 Pro Technical Specifications

Documents

• Schematic (PDF)Check the file.
• PinOut Diagram: (PDF) - (JPG)Check the file.
• Mechanical Diagram (PDF) - (JPG)Check the file.
• User Guide: (PDF)Check the file.

Useful Links

• Arduino Main BoardYou can review our products.
• ArduinoYou can review our products.