Kategori Menüsü
Döviz Kurları
USD
:
3.46 TL
EUR
:
3.67 TL
array(98) { ["ID"]=> string(4) "3561" ["TITLE"]=> string(35) "HC11 433 Mhz Wireless To TTL Modül" ["IS_NEW_PRODUCT"]=> string(1) "0" ["VARIANT_ID"]=> int(0) ["CATEGORY_ID"]=> string(3) "414" ["CATEGORY_IDS"]=> string(3) "414" ["PRICE_SELL"]=> string(7) "48.4400" ["PRICE_BUY"]=> string(7) "48.4400" ["PRICE_NOT_DISCOUNTED"]=> string(7) "48.4400" ["SUPPLIER_PRODUCT_CODE"]=> string(8) "AGJRUZ36" ["CURRENCY_ID"]=> string(1) "1" ["VAT"]=> int(18) ["HAS_IMAGE"]=> string(1) "1" ["HAS_VARIANT"]=> int(0) ["DISPLAY_VAT"]=> string(1) "1" ["BRAND"]=> string(5) "Dorji" ["BRAND_ID"]=> string(2) "68" ["BRAND_URL"]=> string(5) "dorji" ["BRAND_IMAGE"]=> string(0) "" ["MODEL"]=> string(0) "" ["MODEL_ID"]=> string(1) "0" ["MODEL_URL"]=> string(7) "Y0,.htm" ["STOCK"]=> string(3) "994" ["STOCK_UNIT"]=> string(0) "" ["STOCK_UNIT_ID"]=> string(1) "0" ["STOCK_INCREMENT"]=> int(1) ["PRODUCT_CODE"]=> string(5) "T3561" ["SHORT_DESCRIPTION"]=> string(0) "" ["ADDITIONAL_FIELD_1"]=> string(0) "" ["ADDITIONAL_FIELD_2"]=> string(0) "" ["ADDITIONAL_FIELD_3"]=> string(0) "" ["STORE_ID"]=> string(1) "0" ["IS_DISCOUNT_ACTIVE"]=> int(0) ["IS_DISPLAY_DISCOUNTED_ACTIVE"]=> string(1) "0" ["DISCOUNT_PERCENT"]=> int(0) ["CARGO_FREE"]=> string(1) "0" ["CARGO_FREE_MEMBER"]=> string(1) "0" ["CARGO_FREE_VENDOR"]=> string(1) "0" ["REGISTRATION_DATE"]=> int(1467377150) ["IS_MULTIPLE_DISCOUNT_ACTIVE"]=> int(0) ["MIN_SALE_COUNT"]=> string(1) "0" ["MIN_ORDER_COUNT"]=> int(1) ["CATEGORY_URL"]=> string(15) "bluetooth-modul" ["CATEGORY_NAME"]=> string(16) "Bluetooth Modül" ["FILTER_CATEGORY_ID"]=> string(1) "0" ["URL"]=> string(34) "hc11-433-mhz-wireless-to-ttl-modul" ["IN_STOCK"]=> bool(true) ["IS_DISPLAY_PRODUCT"]=> string(1) "0" ["VARIANT_NAME"]=> string(0) "" ["S1"]=> string(1) "0" ["S2"]=> string(1) "0" ["S3"]=> string(1) "0" ["S4"]=> string(1) "0" ["S5"]=> string(1) "0" ["S6"]=> string(1) "0" ["S7"]=> string(1) "0" ["S8"]=> string(1) "0" ["S9"]=> string(1) "0" ["S10"]=> string(1) "0" ["IMAGE_LIST"]=> array(1) { [0]=> array(6) { ["ID"]=> string(5) "13193" ["SMALL"]=> string(73) "https://www.direnc.net//hc11-433-mhz-wireless-to-ttl-modul-13193-35-K.jpg" ["MEDIUM"]=> string(73) "https://www.direnc.net//hc11-433-mhz-wireless-to-ttl-modul-13193-35-O.jpg" ["BIG"]=> string(73) "https://www.direnc.net//hc11-433-mhz-wireless-to-ttl-modul-13193-35-B.jpg" ["TITLE"]=> string(35) "HC11 433 Mhz Wireless To TTL Modül" ["VARIANT_TYPE_ID"]=> string(1) "0" } } ["IMAGE"]=> array(6) { ["ID"]=> string(5) "13193" ["SMALL"]=> string(73) "https://www.direnc.net//hc11-433-mhz-wireless-to-ttl-modul-13193-35-K.jpg" ["MEDIUM"]=> string(73) "https://www.direnc.net//hc11-433-mhz-wireless-to-ttl-modul-13193-35-O.jpg" ["BIG"]=> string(73) "https://www.direnc.net//hc11-433-mhz-wireless-to-ttl-modul-13193-35-B.jpg" ["TITLE"]=> string(35) "HC11 433 Mhz Wireless To TTL Modül" ["VARIANT_TYPE_ID"]=> string(1) "0" } ["IMAGE_COUNT"]=> int(1) ["IMAGE_RATIO"]=> float(1) ["PRICE_CREDIT_CART"]=> string(7) "48.4400" ["PRICE_MONEY_ORDER"]=> string(7) "48.4400" ["MONEY_ORDER_PERCENT"]=> int(0) ["IS_MONEY_ORDER_ACTIVE"]=> bool(true) ["CURRENCY"]=> string(3) "USD" ["TARGET_CURRENCY"]=> string(2) "TL" ["VARIANT_FEATURE1_LIST"]=> array(0) { } ["VARIANT_FEATURE2_LIST"]=> array(0) { } ["VARIANT_FEATURE1_SELECTED"]=> string(0) "" ["VARIANT_FEATURE2_SELECTED"]=> string(0) "" ["VARIANT_DATA"]=> string(101) "{"vat":18,"m_o_p":0,"variant_ids":[],"variant_prices":[],"variant_supplier_codes":[],"active_ids":[]}" ["BARCODE"]=> string(0) "" ["HAS_MAGNIFIER"]=> string(1) "0" ["SUPPLIER_ID"]=> string(2) "15" ["COMMENT_RANK"]=> string(1) "0" ["DEAL"]=> string(1) "0" ["DEAL_START_DATE"]=> string(19) "01.01.1970 02:00:00" ["DEAL_END_DATE"]=> string(19) "01.01.1970 02:00:00" ["CBM"]=> string(1) "0" ["MULTIPLE_DISCOUNT"]=> array(0) { } ["PERSONALIZATION_ID"]=> int(0) ["IS_PERSONALIZATION_ACTIVE"]=> bool(false) ["VARIANT_FEATURE1_TITLE"]=> string(0) "" ["VARIANT_FEATURE2_TITLE"]=> string(0) "" ["DETAIL"]=> string(22313) "

PS:HC-11 can not connect to HC-12. Their work is independently from each other.

Features:

  • Silent current 3. 4ma, ultra-low power consumption.

  • Long distance, range 1 to 40m.(less than 1 m, module can't work normally).

  • Support 3.3V~5V.

  • Support serial pass-through mode, replacing serial line (half duplex).

  • Support IO level,also means transmitting digital level model.

  • Support IO level latch mode.

  • Can set the frequency point, set the address, automatic filtering.

  • Module size: 27.8mm*14.4 mm*4 mm.

  • Suitable for network design.

  • Module supporting software upgrades


Introduction of the module


FU1 mode:

The default delivery mode.


FU2 mode:

The IIDLE current is 80uA,but longer delay, transmission delay is close to 400ms.When use this mode,the serial port baud rate only can be 4800, 2400, 1200.Because of long time delay, when the continuous send serial data to the module, can only send 245 bytes of data by once.Low current consumption, suitable for the application of low power consumption.


3: FU3 mode:

Transmission delay has been reduced to less than 8ms, the corresponding power consumption also increased slightly.


4: FU4 mode:

Transmission distance is longer, the lower baud rate, the longer the transmission distance, the corresponding transmission delay is also a slight increase


Four kinds of serial passthrough mode parameters:


Mode

FU1

FU2

FU3

FU4

Remark

IIDLE

3.5mA

80uA

22mA

22mA

Average value

Delay

20mS

380ms

2mS

7mS

Send a byte

Test 1

31mS


8mS

22mS

Baud rate:9600,send byte

Test 2

31mS


18mS

40mS

Baud rate:9600,send 10 bytes


AT Instruct:

Enter into AT instruct mode:

  1. Connect to 3.3V,give low level to the pin 5(keep low),then enter into AT instruct mode. It will exit AT instruct mode when give high level to pin 5.

  2. Power off, pin 5 connect to GND, then power on, after 1 second ,module will enter into AT instruct mode. It will exit AT instruct mode when give high level to pin 5.


Instructions as described below:

1. AT:

Send this instruction, return OK.


2. AT+V:

Return version information


3. AT + Bxxxx:

Baud rate is xxxx, it can be 2400,4800,9600,19200,38400,57600,115200


4. AT+Cxxx:

Set communication channels ,form 001 to 127


5. AT+FUx:

Switch serial pass through mode, from 1~4


" ["DOCUMENT_INFO"]=> string(0) "" ["WARRANTY_INFO"]=> string(0) "" ["DELIVERY_INFO"]=> string(0) "" ["IS_VIDEO_ACTIVE"]=> string(1) "0" ["NOTES"]=> string(0) "" ["TAGS"]=> array(0) { } ["IS_ORDER_NOTE_ACTIVE"]=> bool(false) ["IS_CASH_POINT_ACTIVE"]=> bool(false) ["IS_RELATED_PRODUCTS_ACTIVE"]=> bool(false) ["DISPLAY_GAIN"]=> bool(false) }

HC11 433 Mhz Wireless To TTL Modül

Stok Kodu : AGJRUZ36
48,44 TL +KDV
57,16 TL KDV Dahil
Paylaş:
  • Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Resimler
  • PS:HC-11 can not connect to HC-12. Their work is independently from each other.

    Features:

    • Silent current 3. 4ma, ultra-low power consumption.

    • Long distance, range 1 to 40m.(less than 1 m, module can't work normally).

    • Support 3.3V~5V.

    • Support serial pass-through mode, replacing serial line (half duplex).

    • Support IO level,also means transmitting digital level model.

    • Support IO level latch mode.

    • Can set the frequency point, set the address, automatic filtering.

    • Module size: 27.8mm*14.4 mm*4 mm.

    • Suitable for network design.

    • Module supporting software upgrades


    Introduction of the module


    FU1 mode:

    The default delivery mode.


    FU2 mode:

    The IIDLE current is 80uA,but longer delay, transmission delay is close to 400ms.When use this mode,the serial port baud rate only can be 4800, 2400, 1200.Because of long time delay, when the continuous send serial data to the module, can only send 245 bytes of data by once.Low current consumption, suitable for the application of low power consumption.


    3: FU3 mode:

    Transmission delay has been reduced to less than 8ms, the corresponding power consumption also increased slightly.


    4: FU4 mode:

    Transmission distance is longer, the lower baud rate, the longer the transmission distance, the corresponding transmission delay is also a slight increase


    Four kinds of serial passthrough mode parameters:


    Mode

    FU1

    FU2

    FU3

    FU4

    Remark

    IIDLE

    3.5mA

    80uA

    22mA

    22mA

    Average value

    Delay

    20mS

    380ms

    2mS

    7mS

    Send a byte

    Test 1

    31mS


    8mS

    22mS

    Baud rate:9600,send byte

    Test 2

    31mS


    18mS

    40mS

    Baud rate:9600,send 10 bytes


    AT Instruct:

    Enter into AT instruct mode:

    1. Connect to 3.3V,give low level to the pin 5(keep low),then enter into AT instruct mode. It will exit AT instruct mode when give high level to pin 5.

    2. Power off, pin 5 connect to GND, then power on, after 1 second ,module will enter into AT instruct mode. It will exit AT instruct mode when give high level to pin 5.


    Instructions as described below:

    1. AT:

    Send this instruction, return OK.


    2. AT+V:

    Return version information


    3. AT + Bxxxx:

    Baud rate is xxxx, it can be 2400,4800,9600,19200,38400,57600,115200


    4. AT+Cxxx:

    Set communication channels ,form 001 to 127


    5. AT+FUx:

    Switch serial pass through mode, from 1~4


T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.