ESP32 WROOM-32U Wifi Bluetooth Development Module
If you are interested in connecting your project to the Web and being a part of the IOT (Internet of Things) project, this development board is for you! Like other microcontrollers and microprocessors, the ESP32 is built in power regulation circuits, on-board antennas, noise filters, and fits snugly on any breadboard for rapid prototyping.
The ESP32 can interface with other MCUs as a master or slave, or operate completely independently via SPI / SDIO, I2C and UART. The microcontroller can also support multiple sensors with an SD card and 32 GPIO pins (all available for PWM).
ESP32-WROOM-32U Wifi Bluetooth Development Module Technical Specifications
| Manufacturer | Espressif |
| Product Category | Wifi Module |
| Sherry | ESP32-WROOM-32U |
| Chip | ESPG2-DOWD |
| SPI Flash | 32 Mbit, 3.3V |
| Crystal | 40Mhz |
| Antenna | The U.FL carrier must be equipped with an IPEX antenna |
| WiFi Frequency | 2.4GHZ ~ 2.5GHZ |
| Interface | SD card, UART. SPI. SDIO. I2C.LED PWM, motor PWM. I2C, IR, pulse counter, GPIO, capacitive touch sensor, ADC.DAC |
| On-Chip Crystal | 40MHZ crystal |
| Integrated SPI Flash | 4 MB |
| Working Voltage / Supply Voltage | 2.7V ~ 3.6V |
| Average Operating Current | 80mA |
| Minimum Supply Flow | 500mA |
Documents
- ESP32-DevKitC V4 Getting Started GuideCheck out the page.
Useful Links
- Wifi ModuleYou can review our products.
- Wireless CommunicationYou can review our products.
ESP32-WROOM-32U Wifi Bluetooth Development Module
- Features
- Payment Options
- Comments (5)
- Images
-
ESP32 WROOM-32U Wifi Bluetooth Development Module
If you are interested in connecting your project to the Web and being a part of the IOT (Internet of Things) project, this development board is for you! Like other microcontrollers and microprocessors, the ESP32 is built in power regulation circuits, on-board antennas, noise filters, and fits snugly on any breadboard for rapid prototyping.
The ESP32 can interface with other MCUs as a master or slave, or operate completely independently via SPI / SDIO, I2C and UART. The microcontroller can also support multiple sensors with an SD card and 32 GPIO pins (all available for PWM).
ESP32-WROOM-32U Wifi Bluetooth Development Module Technical Specifications
Manufacturer Espressif Product Category Wifi Module Sherry ESP32-WROOM-32U Chip ESPG2-DOWD SPI Flash 32 Mbit, 3.3V Crystal 40Mhz Antenna The U.FL carrier must be equipped with an IPEX antenna WiFi Frequency 2.4GHZ ~ 2.5GHZ Interface SD card, UART. SPI. SDIO. I2C.LED PWM, motor PWM. I2C, IR, pulse counter, GPIO, capacitive touch sensor, ADC.DAC On-Chip Crystal 40MHZ crystal Integrated SPI Flash 4 MB Working Voltage / Supply Voltage 2.7V ~ 3.6V Average Operating Current 80mA Minimum Supply Flow 500mA Documents
- ESP32-DevKitC V4 Getting Started GuideCheck out the page.
Useful Links
- Wifi ModuleYou can review our products.
- Wireless CommunicationYou can review our products.