Arduino Flame Detection Sensor Module (Infrared)

IR Infrared Arduino Flame Detection Sensor Module

This is InfraredArduino Flame Sensor ModuleIt can detect flame from light source.

Arduino Flame Sensor Features

• It can detect flame or wavelength at 760 nm at 1100 nm light source.
• 60 degree detection angle has a particularly sensitive spectrum.
• Sensitivity can be adjusted. (Shown in blue digital potentiometer setting.)
• Comparator output signal clean waveform better than 15mA.
• Working Voltage 3.3V - 5V
• It output as follows: DO digital switching outputs (0 and 1) and AO analog voltage output.
• It has a fixed bolt hole for easy installation.
• PCB size: 3.2cm x 1.4cm
• Uses a large LM393 comparator.

Wiring instructions:

1. VCC: VCC3.3-5V

2.GND: GND

3.DO: TTL switch signal output

Useful Links

• Arduino Sensor and Module TypesYou can review our products.