Anemometer with Analog Voltage Output Wind Speed Sensor

Anemometer with Analog Voltage Output Wind Speed Sensor

Anemometer is a device used to measure wind speed. It is widely used in meteorology stations. This well-made anemometer is designed to be mounted outdoors and easily measure wind speed.

Usage: use the black color wire for the ground connection of power and signal input. Brown cable is 7-24V DC supply input (we tried 9V battery successfully) analog voltage output is read from blue cable. Output voltage will be in the range of 0.4V (0 m / s wind) to 2.0V (32.4m / s wind speed). That is all! The sensor is durable and easy to install. The cable can be removed after several turns and has a weatherproof connector.

Note:

This anemometer is not IP rated, so it is not designed to withstand water ingress without additional seals or protection.

Analog Voltage Output Anemometer Wind Speed Sensor Features

Dimensions:

• Height (bottom to center): 105mm / 4.1 '

• Center to wing distance: 102mm / 4 '

• Arm length: 70mm / 2.8 '

• Weight: 111.8g

Cable Sizes:

• Cable length: 99cm / 39 '

• Plug length: 30mm / 1.2 '

• Diameter (thickness): 4.8mm / 0.2 '

Specifications:

• Output: 0.4V to 2V

• Test Range: 0.5m / s to 50m / s

• Minimum wind speed that can be measured: 0.2 m / s

• Resolution: 0.1m / s

• Accuracy: 1 meter / sec in worst case

• Max Wind Speed: 70m / s

• Connector details: Pin 1 - Power (brown wire), Pin 2 - Ground (black wire), Pin 3 - Signal (blue wire), Pin 4 idle

Useful Links

• Other SensorYou can review our products.