AC 220V 2000W Motor Speed Control Card

220V 2000W Motor Speed Control Card

Motor Speed Control CardIs a motor driver-motor speed control circuit with 220 Vac input voltage and maximum 2000W values.

The blue trimpot is used to fine tune the lowest level of output voltage. The position of the lowest voltage level between 30-80V is adjusted with the blue trimpot. You can normally reduce the voltage up to 50V levels. You can reduce it to a lower voltage or to a higher voltage level with this blue trimpot.

220V 2000W Motor Speed Control Card; resistance, electric oven, water heater, fan, motor, lamps etc. It can be used for voltage control of devices.

It is a control circuit that you can use in the power control of your devices operating with AC voltage. Using this circuit, you can control the brightness of your normal incandescent and halogen bulbs, adjust the power of your heaters, and control the speed of your single phase AC motors. Max. It can be used with 4000W resistive load. It allows you to control 220VAC between 10-220V.

NOTE: Left 2 terminal connections on the module are AC 220V input, Right 2 terminal connections are the load output of the control card. When you measure with a multimeter, you cannot see a value, you must measure under load.

220V 2000W Motor Speed Control Card Technical Specifications

Useful Links

• Driver and Control CardsYou can review our products.
• Motor Driver and Control CardsYou can review our products.