10.1 inch HDMI Lcd Screen 1024x600

10.1 inch HDMI Lcd Screen 1024x600 -WaveShare-

• 1024 × 600 high resolution
• Resistive touch control
• Compatible with Raspberry Pi's revision and connect directly (except Pi 1 model B or Pi Zero, which requires an HDMI cable)
• Provided drivers (works directly with their Raspbian / Ubuntu)
• It also works as a computer monitor, in this case the touch panel cannot be used and an HDMI cable is required
• HDMI interface, an unnecessary input / output for viewing (but the touch panel still requires I / O)
• Backlight control for low light consumption

Pin No / Symbol / Description

• 1, 17 / 3.3V / Power positive (3.3V power input)
• 2, 4 / 5V / Power positive (5V power input)
• 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 / NC / NC
• 6, 9, 14, 20, 25 / GND / Ground
• 19 / TP_SI / Touch Panel's SPI data input
• 21 / TP_SO / Touch Panel's SPI data output
• 22 / TP_IRQ / Touch Panel interrupt during Touch Panel cutting, low level
• 23 / TP_SCK / Touch Panel's SPI clock
• 26 / TP_CS / Touch Panel chip selection, low effective