Grove - EMG Detector / Sensor - SeeedStudio
EMG detectoris a bridge connecting the human body and electricity; the sensor collects the small muscle signal and processes by the 2nd amplification and filtering; output signalCan be recognized by Arduino. You can add this signal to your control system.
Note: The sensor cannot be used for medical purposes.
In standby mode, the output voltage is 1.5 V. When detects muscle activity, the output signal rises, the maximum voltage is 3.3V. You can use this sensor in 3.3V or 5V system.
Grove - EMG Detector / Sensor - SeeedStudio Features
- Grove Compatible
- 3.5mm Connector
- Disposable surface electrodes
- Power supply voltage: 3.3V-5V
- 1000mm Cable Lead
- No additional power supply
Mode of Operation
When you finish downloading the demo code, it will take about 5 seconds to start it, you should save the static during the startup process.
When launching, you can see that the Led Bar level will go from level 10 to level 0. When the Led Bar is All off you can now move it.
You can see that the level of the Led Bar will change as you move.
Documents
- Groove EMG Detector EAGLE fileExamine.
- Groove EMG Detector Demo Github CodesCheck out the page.
Useful Links
- Arduino Module TypesYou can examine.
Grove - EMG Detector
- Features
- Payment Options
- Comments (0)
- Images
-
Grove - EMG Detector / Sensor - SeeedStudio
EMG detectoris a bridge connecting the human body and electricity; the sensor collects the small muscle signal and processes by the 2nd amplification and filtering; output signalCan be recognized by Arduino. You can add this signal to your control system.
Note: The sensor cannot be used for medical purposes.
In standby mode, the output voltage is 1.5 V. When detects muscle activity, the output signal rises, the maximum voltage is 3.3V. You can use this sensor in 3.3V or 5V system.
Grove - EMG Detector / Sensor - SeeedStudio Features
- Grove Compatible
- 3.5mm Connector
- Disposable surface electrodes
- Power supply voltage: 3.3V-5V
- 1000mm Cable Lead
- No additional power supply
Mode of Operation
When you finish downloading the demo code, it will take about 5 seconds to start it, you should save the static during the startup process.
When launching, you can see that the Led Bar level will go from level 10 to level 0. When the Led Bar is All off you can now move it.
You can see that the level of the Led Bar will change as you move.
Documents
- Groove EMG Detector EAGLE fileExamine.
- Groove EMG Detector Demo Github CodesCheck out the page.
Useful Links
- Arduino Module TypesYou can examine.